Sonoporation-mediated transduction of siRNA ameliorated experimental arthritis using 3 MHz pulsed ultrasound

The goal of this feasibility study was to examine whether sonoporation assisted transduction of siRNA could be used to ameliorate arthritis locally. If successful, such approach could provide an alternative treatment for the patients that have or gradually develop adverse response to chemical drugs. Tumor necrosis factor alpha (TNF-α) produced by synovial fibroblasts has an important role in the pathology of rheumatoid arthritis, inducing inflammation and bone destruction. In this study, we injected a mixture of microbubbles and siRNA targeting TNF-α (siTNF) into the articular joints of rats, and transduced siTNF into synovial tissue by exposure to a collimated ultrasound beam, applied through a probe 6 mm in diameter with an input frequency of 3.0 MHz, an output intensity of 2.0 W/cm² (spatial average temporary peak; SATP), a pulse duty ratio of 50%, and a duration of 1 min. Sonoporation increased skin temperature from 26.8 °C to 27.3 °C, but there were no adverse effect such as burns. The mean level of TNF-α expression in siTNF-treated knee joints was 55% of those in controls. Delivery of siTNF into the knee joints every 3 days (i.e., 7, 10, 13, and 16 days after immunization) by in vivo sonoporation significantly reduced paw swelling on days 20–23 after immunization. Radiographic scores in the siTNF group were 56% of those in the CIA group and 61% of those in the siNeg group. Histological examination showed that the number of TNF-α positive cells was significantly lower in areas of pannus invasion into the ankle joints of siTNF- than of siNeg-treated rats. These results indicate that transduction of siTNF into articular synovium using sonoporation may be an effective local therapy for arthritis.     

Ellagic Acid Suppresses ApoB Secretion and Enhances ApoA-1 Secretion from Human Hepatoma Cells,HepG2

The effect of ellagic acid (EA), a naturally occurring polyphenolic compound, on the secretion of apolipoproteins from human hepatocytes, HepG2, was investigated. The levels of apoB and apoA-1 secreted in the cell culture medium were determined by sandwich ELISA. EA did not affect cell viability at the tested concentrations (up to 50 µM). EA suppressed the secretion of apoB and enhanced that of apoA-1 from HepG2 cells. However, cellular apoB levels were increased, suggesting that EA inhibited the trafficking of apoB during the process of secretion. In contrast, the increase in the cellular levels of apoA-1 was consistent with its secreted levels. These results indicate that EA inhibits the secretion of apoB from hepatocytes and increases the secretion of apoA-1. Both of these effects are beneficial for lipoprotein metabolism in the prevention of lifestyle-related diseases. The detailed mechanism underlying these effects of EA on lipoprotein metabolism should be elucidated in the future, but this naturally occurring polyphenolic compound might be antihyperlipidemic. Based on these results, EA is suggested as a candidate food-derived compound for the prevention of hyperlipidemia.     

Full-parallax three-dimensional display based on light field reproduction

Optical Review - Light field displays can display three-dimensional (3D) images with smooth motion parallax without the use of special glasses, by reproducing light ray information from objects....     

FMS scheduling based on timed Petri Net model and reactive graph search

This paper presents a new scheduling method for manufacturing system based on the Timed Petri Net model and a reactive fast graph search algorithm. The following two typical problems are addressed in this paper. (1) Minimization of the maximum completion time. (2) Minimization of the total tardiness. As for the problem (1), a new search algorithm which combines the RTA^∗ and a rule-based supervisor is proposed. As for problem (2), the original Petri Net model is converted to its reverse model and the algorithm developed for the problem (1) is applied, regarding the due date as the starting time in the reverse model. Some numerical experiments are carried out to demonstrate usefulness of our algorithm.     

Mechanical fabrication of metal nano-contacts showing conductance quantization under electrochemical potential control

We have mechanically fabricated Ni and Cu nano-constrictions in solution to study their quantized conductance behavior under electrochemical potential control. Conductance quantization was observed at both metals in solution at room temperature for the first time. The conductance of Cu nano-constriction was quantized in units of G₀(=2e²/h). A sharp 1G₀ peak was observed in the conductance histogram. For Ni, a rather broad peak at 1–1.5G₀ was observed in the histogram. The conductance quantization behavior was discussed by comparing previously documented results of nano-constrictions fabricated in air or ultra-high vacuum conditions, with those fabricated in solution.     

Estimating the covariance matrix and the generalized variance under a symmetric loss

For estimating the power of a generalized variance under a multivariate normal distribution with unknown means, the inadmissibility of the best affine equivariant estimator relative to the symmetric loss is shown, and a class of improved estimators is given. The problem of estimating the covariance matrix is also discussed.     

Complex impedance spectra of chip inductor using Li–Zn–Cu–Mn ferrite

A multi-layer chip inductor (MCI) was fabricated using polycrystalline Li–Zn–Cu–Mn ferrite and the green-sheet technique, and its complex impedance spectrum was evaluated with the help of numerical calculations. The complex impedance spectra of the MCI component using Ni–Zn–Cu ferrite, which have been widely used for this application, were very sensitive to the residual stress and deviated much from the calculated values; however, it was found that the complex impedance spectrum of the MCI component using Li–Zn–Cu–Mn ferrite is quite well reproduced by calculation, where the complex permittivity and permeability of the polycrystalline ferrite as well as the MCI dimensions, were used. It implied that the magneto-striction effect was negligible in case of MCI using Li–Zn–Cu–Mn ferrite, and that the difference was related to magneto-strictive coefficient of the polycrystalline ferrite. Consequently, utilization of Li–Zn–Cu–Mn ferrite enabled us to easily design the complex impedance of MCI component.     

Preconcentration and determination of cadmium by GFAAS after solid-phase extraction with synthetic zeolite.

The solid-phase extraction (SPE) method for the preconcentration of trace amounts of cadmium using synthetic zeolite A-4 and its determination by graphite furnace atomic absorption spectrometry (GFAAS) was investigated. The preconcentration conditions, such as the optimum pH range of the sample solution for the adsorption of cadmium and the kind of acid solution for dissolving the cadmium-adsorbed synthetic zeolite A-4, as well as the measurement conditions for the determination of cadmium by GFAAS, e.g., the ashing and atomizing temperature, were investigated. Quantitative recovery of cadmium onto zeolite A-4 from the sample solution over the pH range 2.0 - 9.0 was achieved by the batch method. After the solid-phase (cadmium-adsorbed zeolite A-4) was separated from the sample solution by a membrane filter, it was dissolved in 2.0 cm(3) of 2.0 mol dm(-3) nitric acid. An aliquot of the resulting solution was injected into the graphite furnace. In GFAAS measurements an alternate gas (Ar, 90%; O(2), 10%) was used as a sheath gas, and the ashing temperature and atomizing temperature were 400 degrees C and 1600 degrees C, respectively. The detection limit (3 sigma) for cadmium was 0.002 microg dm(-3). The relative standard deviation at 0.010 microg dm(-3) was 3.5 - 4.5% (n = 5). The proposed method has been successfully applied to the analysis of trace cadmium in environmental water samples.